Acroprint timeQplus (software version 4.x and above) Manuel d'utilisateur télécharger pdf (Page 59)

timeQplus Administrator Functions

06-0414-000 Rev. B 55

• The Proxy Server field defaults to the tQp Server machine. Click the search button and

select the proxy server designation for the computer to which this time clock is physically

connected.

• Select the correct values for Serial port, Baud Rate, Device ID, Time Zone, and Time Clock type.

• Enter a description, which is optional, but recommended. A description such as "Front Lobby" or

"Production Entrance C" can be useful if you have a number of connected Time Clocks.

• Click the Next button to continue.

• The "Test Connection" window will appear and indicate if the Time Clock was successfully

connected to timeQplus. If so, click the Next button. If not, click the Back button to review the

setup information on the previous window and try again or click Cancel to exit the wizard and

diagnose the problem.

• When a successful connection is made, the next window will ask if you want to Clear

Transactions (aka punches) on this Time Clock. To clear transactions, check the "Clear device

transactions…" box and click the Next button.

• The "Clear Users" window will ask if you want to delete all existing users on this Time Clock. To

delete all users, click the Clear users button; otherwise, click the Next button to continue

• On the last screen, although not required, performing a manual poll is recommended as noted.

Click the Finish button to exit the wizard. This Time Clock should now be listed on the “Comm

Port (RS232)” tab.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 87 88

Pas de commentaire

Acroprint timeQplus (software version 4.x and above) Manuel d'utilisateur Page 59